18mm rear sway bar Dbush

[Magfan2019]

Does anyone know where I can find 18mm rear sway bar Dbush for a Verada Gtvi, which I assume is the same as the VRX. I have found 16mm & 17mm. But no luck with the 18mm.

[leadfoot6]

Ring Signature Sway Bars

Nowra.

4421 2722

Ask for Todd.

He supplied me with my 18 mm aftermarket rear AWD bar 4 years ago, and the 22 mm bar that has just replaced the 18mm bar.

He supplied the necessary bushes both times, so he can get them when needed.

If needed, also try Superpro Brisbane:

https://superpro.com.au/

Of course, Repco, Supercheap etc. should have no difficulty getting them for you.

[leadfoot6]

EDIT

This looks just right:

Nolathane Rear Sway Bar Mount Bush COMMODORE VP VR VS VT VX VY VZ 42551 18mm

https://www.ebay.com.au/itm/Nolathan...wAAOSwPYZU8vkE

Note: For those not 100 % certain(like I used to be), apply the supplied grease only between bar and bush(inside) - not between bush and clamping mounting bracket(outside).

[Magfan2019]

Thanks leadfoot.
i have tried Repco and Supercheap, they don't have them in the 18mm. I can only get the front one's, which i have already bought from Mitsfix.
Looked on Superpro website, they dont seem to have in that size either, but will give them a call on Monday.
Might try those Commodore one's. A mate has a VE which look similar to the ones you posted, Might measure them up.
Thanks for the advice.

[leadfoot6]

Thanks leadfoot.
i have tried Repco and Supercheap, they don't have them in the 18mm. I can only get the front one's, which i have already bought from Mitsfix.
Looked on Superpro website, they dont seem to have in that size either, but will give them a call on Monday.
Might try those Commodore one's. A mate has a VE which look similar to the ones you posted, Might measure them up.
Thanks for the advice.

Image and link to 18mm bush:




https://superpro.com.au/tradeview/in...nr=SPF1450-18K